| |
Xilecone Plus
| Overview |
In line with our company vision in making a better place for man kind to live in, CSC Screen Process
Supplies Sdn Bhd had developed a total new series of environmental friendly ink that is non toxic,
chlorinated free, surgical grade and user friendly. The new inks are called Xilicone Plus. Xilicone
Plus System is a two-component silicone paste rubber. These systems consist of a Xilicone Plus Base,
and a Xilicone Plus Catalyst Base at a ratio for use of 1:1.
It also consists of a white system and 10 standard high pigmented balance pastes and 6 florescent
balance pigmented paste color. All Xilicone Plus ink product cures with heat.
|
|
| |
| Key Features |
Good printability viscosity, easily pigment able, Heat accelerated cure, Easy to use, curing speed can be controlled.
|
|
| |
| Type Of Fabrics |
Almost all Natural and Syntactic fiber textile materials.
*** ALWAYS PRETEST FASTNESS PROPERTIES BEFORE PRODUCTION. ***
|
|
| |
| Application Method |
|
Always mix Xilicone Base with Xilicone Catalyst Base at the ratio of 1:1 prior mixing the required
colors. Add Xilicone Concentrated Pigment up to a maximum of 10% on color required. Use the same
ratio suggested for Xilicone White Base as well as Xilicone Suede base. Xilicone Plus System can be
use as and alternative for PVC free ink solution on automatic presses printing as this products are
environmental friendly and highly hygienic. Xilicone Suede base was also being use as mate effect
PVC free mate printing requirements.
|
|
| |
| Type Of Stencil & Mesh |
Used only dual cure direct in direct emulsion. Capillary film are recommended for fine details
printing (Call your emulsion supplier for water resist emulsion)
49T to 54T mono-filament for high density and opacity.
69 to 120T mono-filament for detail work
|
|
| |
| Squeegees And Printing Table |
|
For optimum high density print effect, 55/90/65 sore triplet hardness squeegee is recommended. Soft
tables are most suitable. To achieve good result for printing halftone, medium hardness silicone
laminated table are recommended.
|
|
| |
| Intermediate Flashing and Drying |
Xilicone can be easily flash dry at 100ºC-120ºC degree Celsius prior printing subsequent color
overlapping. For complete polymerization prints are to be cure at 100ºC-120ºC degree Celsius or 210-
250 degree Fahrenheit for 1.5 minutes with Air flow recommended are 1500 cfm air.
Xilicone will be able to achieve optimum curing on prolong air exposure once it optimum curing
temperature had been kick started.
|
|
| |
| Others Important Tips |
|
Never use ink that had been mix with curing additive that had been kept for more than 12 hour.
Always remember the optimum ratio of 10parts base to 10 parts catalyst with maximum 1 part of
pigments. Store ink away from heat and light sauce.
|
|
|
 |
Plastisol
Waterbase
Other Products
|
 |
|
|
|
    |
| Copyright © CSC SCREEN PROCESS SUPPLIES SDN BHD. |
Web design by Netallianz |
